Okinawa Praisepro & IPraise+ Charger – 72V 10A Lithium (D-Type) | Pre-2022

72V 10A Lithium Battery Charger (Model RE2AC7210) with D-Type 2-Pin rectangular connector for 72V lithium battery. Compatible with Okinawa Praisepro and IPraise+ pre-2022 models. Features a robust aluminium extrusion body for superior heat dissipation.

Compatibility:

• Vehicles: Okinawa Praisepro and IPraise+ (pre-2022 models only)
• Connector: D-Type 2-Pin rectangular connector
• ⚠️ NOT compatible with 2022 and newer models — those use the Chagori round connector

Key Highlights:

• Origin: Made in India
• Warranty: 12 Months from date of purchase
• Return Policy: 7 Days Return/Replacement
• Estimated Delivery: 3–10 Days

🔌 Not sure which connector you have?

Okinawa Praisepro and IPraise+ scooters come with two different charging port types depending on the year of purchase:

- Pre-2022 models → D-Type connector (rectangular slot) ✅ This is the right charger
- 2022 and newer → Chagori connector (round port with 2+4 pins and a blue ring)

👉 Look at the charging port on your scooter:
- Rectangular slot = D-Type → you're in the right place
- Round port with 2+4 pins and a blue ring = Chagori → see our Chagori charger instead

Technical Features:

• High Speed Charging: 10A output significantly reduces charging time vs standard 6A chargers
• Wide Input Range: Operates between 170V–300V AC, handles voltage fluctuations effectively
• Smart Protection: Microcontroller-based design with auto cut-off at 84V
• Advanced Cooling: Internal DC fan with aluminium casing for optimal thermal management
• Reliability: Type tested for bump and vibrations; 100% full load burn-in tested

Mechanical Specifications:

• Dimensions (L × W × H): ~23.5 cm × 12.5 cm × 8 cm
• Weight: ~2.6 kg
• Connector Type: D-Type Male (2-Pin Rectangular)

Electrical Specifications:

Input:

• Input Voltage: 170V–300V AC
• Frequency: 47–63 Hz
• Max Input Current: 6.0A (@ 230V AC)
• Note: Connect to a standard 5A/15A wall socket with proper grounding.

Output:

• Nominal Voltage: 72V DC
• Max/Cut-off Voltage: 84V DC
• Output Current: 10.0A ± 0.3A
• Model: RE2AC7210

Protection Systems:

• Output Short Circuit Protection
• Over-Temperature Protection
• Output Overload Protection
• Battery Reverse Polarity Protection

Safety Instructions:

• Connect charger to battery before switching on AC mains
• Keep away from water; do not expose to rain
• For 72V Li-Ion battery systems only
• Use in a well-ventilated area; do not cover the charger while in use

Warranty Terms: Warranted against defects in material and workmanship for 12 months from the original invoice date. Warranty void if serial number is missing or tampered, or damage results from misuse, unauthorized repair, improper connection, or environmental factors.

Looking for a different Okinawa charger?
→ Okinawa Praisepro / IPraise+ — Chagori Connector (2022 onwards)
→ Okinawa Ridge / Ridge+ / Dual 100 — 67.2V Charger
→ Okinawa R30 / Lite — 54.6V Charger
→ Browse all Okinawa chargers

❓ Frequently Asked Questions

Q: How do I know if my scooter has a D-Type connector?
A: If your Okinawa Praisepro or IPraise+ was purchased before 2022, it has the D-Type connector — a rectangular slot on the scooter body.

Q: Will this charger work on my 2022 or newer Praisepro?
A: No — newer models use a Chagori round connector with 2+4 pins and a blue ring. Order our Chagori charger instead.

Q: Is this a fast charger?
A: Yes — at 10A output this is the fastest available charger for the Praisepro and IPraise+, significantly faster than a standard 6A charger.

Q: How long does a full charge take?
A: Approximately 3 hours for the Okinawa Praisepro and 5 hours for the IPraise+ from empty with this 10A charger.

Q: My battery is completely dead. Will this charger revive it?
A: In most cases yes — this charger can activate and begin charging deeply discharged lithium batteries. If the battery has been fully discharged for an extended period it may require a service center check.

Q: Is this an original Okinawa charger?
A: This is a high-quality compatible replacement charger, not an Okinawa-branded unit. It meets the same 72V/84V cut-off specification as the original and is made in India.

Q: What if I accidentally order the wrong connector type?
A: The charger will not fit your scooter's port. Please check your port before ordering. We accept returns within 7 days if the item is unused and in original packaging.