Okaya Electric Scooter Charger - 48V-90V 10A Lithium Battery Charger (CAN Protocol) - Model OLBC1KWCAN

Genuine Okaya EV Charger (Model OLBC1KWCAN) designed for high-performance electric scooters. This smart charger features a wide output range of 48V–90V and utilises CAN Protocol communication to ensure precise and safe charging for Lithium-Ion battery packs. Housed in a rugged aluminium metal casing with active cooling via built-in DC fan for optimal thermal management.

Looking for the newer IP65 weatherproof version? Okaya now also supplies an IP65-rated variant of this charger (Model AP028391000) with a sealed enclosure for better protection against dust and water. View the Okaya IP65 Waterproof CAN Charger.

Compatibility:

• Confirmed compatible models: Okaya Faast F2B, Faast F2F, Faast F2T, Faast F3, Faast F4
• Connector: Chagori 2+4 Pin circular connector with blue ring
• Battery system: 72V Lithium-Ion
• This charger is compatible with all Okaya scooters running a 72V lithium battery system with a Chagori 2+4 Pin blue connector. If your Okaya model isn't listed above, verify by matching the connector type and checking your existing charger label for "72V input / 84V output" — if it matches, this charger will work.
• ⚠️ Older Okaya Faast with IEC 3-pin female connector (non-CAN)? This CAN charger will not fit. Order our Okaya Faast Non-CAN charger (IEC connector) instead.

Key Highlights:

• Origin: Made in India
• Warranty: 6 Months from date of purchase
• Return Policy: 7 Days Return/Replacement
• Estimated Delivery: 3–10 Days

Technical Features:

• Smart CAN Communication: Communicates directly with the battery BMS for optimised charging
• Wide Voltage Range: Automatically adjusts between 48V and 90V based on battery requirements
• Active Cooling: Built-in DC fan with aluminium casing for optimal thermal management
• LED Status Indicators: Integrated status indicators for charging progress
• SMPS Technology: High-efficiency switching power supply

Mechanical Details:

• Body Material: Aluminium Metal Case
• Connector Type: Chagori 2+4 Pin circular connector with blue ring
• Cooling: Active cooling via built-in DC fan

Electrical Specifications:

Input:

• Input Voltage: 180V–280V AC
• Frequency: 50–60 Hz
• Max Input Current: 8.0A
• Note: Connect to a standard wall socket with proper grounding.

Output:

• Output Voltage: 48V–90V DC (Variable via CAN)
• Output Current: 10A
• Model: OLBC1KWCAN

Protection Systems:

• Over-Temperature Protection
• Output Short Circuit Protection
• Output Overload Protection
• Reverse Polarity Protection

Safety Instructions:

• Connect DC output to battery before switching on AC mains
• Do not open or tamper with the charger unit
• Keep away from water, rain, or other liquids; charge in a dry, well-ventilated area
• The metal body may become warm during charging — this is normal heat dissipation

Warranty Terms: Warranted against defects in material and workmanship for 6 months from the original invoice date. Warranty void if serial number or seal is removed or tampered, charger shows signs of physical damage or misuse, unit has been opened or repaired by unauthorised personnel, or damage is caused by water, fire, voltage surges, or use with an incompatible battery or vehicle.

Looking for a different Okaya charger?
→ Okaya IP65 Waterproof CAN Charger — Model AP028391000
→ Okaya Faast Non-CAN Charger — IEC Connector
→ Browse all Okaya chargers

❓ Frequently Asked Questions

Q: Which Okaya models is this charger compatible with?
A: Confirmed compatible with Okaya Faast F2B, Faast F2F, Faast F2T, Faast F3, and Faast F4 — all of which run a 72V lithium battery system with Chagori 2+4 Pin blue connector. Other Okaya models with the same 72V system and blue Chagori connector should also be compatible — see below.

Q: My Okaya model isn't listed here. Will this work?
A: If your Okaya scooter has a 72V lithium battery and a Chagori 2+4 Pin blue connector, this charger will work. Check your existing charger label for "72V input / 84V output" — if it matches, you're good to order. Still unsure? Send a photo of your charging port on WhatsApp and we'll confirm for you.

Q: What's the difference between this and the IP65 version?
A: Both have identical electrical specs (84V 10A CAN Protocol). The IP65 version (Model AP028391000) has a fully sealed weatherproof enclosure rated for dust and water resistance — better for outdoor or dusty storage environments. This standard version (OLBC1KWCAN) is for indoor use and has active fan cooling.

Q: Does this charger make noise?
A: Yes — this model has an active cooling fan which runs during charging. It's not loud but audible. If you need silent operation, consider the IP65 version which uses passive cooling.

Q: My Okaya Faast has an IEC 3-pin connector, not Chagori. Will this work?
A: No — older Okaya Faast models use a non-CAN IEC 3-pin female connector. Order our Non-CAN IEC charger instead.

Q: How long does a full charge take?
A: At 10A output, a full charge typically takes 5–6 hours for the Faast F4 (4.4 kWh battery) and 3–4 hours for the Faast F2B (2.2 kWh battery).

Q: Is Cash on Delivery available?
A: Partial COD is available across India. Free shipping and 7-day easy returns included.